Working with the Controller
The Controller contains a hardware on/off button
and touch screen for user interaction.
To start up the Controller press the on/off button
for 4 seconds. Starting up may take up to 1 minute.
To shut down or restart the Controller press the
on/off button for 2-3 seconds until the screen
displays displays three on screen buttons: ‘Power
off’, ‘Restart’ and ‘Emergency mode’. Touch ‘Power
off’ to shut down or ‘Restart’ to restart the
Controller.
Leave ‘Emergency mode’ off. This is an Android
feature not required for the operation of KOOI®
ReachControl and may result in slowdown of the
Controller functions and communication with
sensors.
A short press of the on/off button while the Controller is on will put the Controller in
standby mode. Press again to bring the Controller out of standby mode.
All further user interaction will be done through the touch screen, continue in chapter
Working with the app at page 27.
Maintenance
Whenever required remove dirt and grime from the touch screen/Controller using a
clean towel or microfiber cloth.
25
