Meggitt vibro-meter SpeedSys300 ODS301, User Manual

Page: 169 / 170

Document reference MAODS301/E USER MANUAL
Edition 4 - May 2022 SpeedSys300 ODS301 overspeed detection system
F - 27
Parameters and configuration settings
APPENDIX F: SPEEDSYS300 ODS301 MODBUS REGISTER DEFINITIONS
F.2.9 Output configuration – factory
Table F-14 describes the SpeedSys300 ODS301 Modbus registers related to the module
output configuration – factory.
NOTE: This data block is intended/reserved for factory use only and should not be
changed by end-users.
NOTE: The Modbus registers in this data block are read/write.
Key:
n.u. – Not used.
Table F-14: SpeedSys300 ODS301 Modbus registers – output configuration – factory
Address Name
Data
type
Range Access Description
6000 cal_aout_4ma uint16 100 to 24000 Level 2 PWM value for 4 mA
6001 cal_aout_20ma uint16 100 to 24000 Level 2 PWM value for 20 mA
6002 cal_ain_4ma uint16 0 to 16383 Level 2 Current readback for 4 mA
6003 cal_ain_20ma uint16 0 to 16383 Level 2 Current readback for 20 mA
6004 v_max single 0 to 2100000 Level 2 Max. limit for speed settings
6006 v_min single 0 to 2100000 Level 2 Min. limit for speed settings
6008 acc_max single
−100000 to
100000
Level 2 Max. limit for acceleration settings
6010 acc_min single
−100000 to
100000
Level 2 Min. limit for acceleration settings
6012 Reserved uint16 Level 2
6013 crc_diag_fact uint16 Level 2 Parameter block CRC