Meggitt vibro-meter SpeedSys300 ODS301, User Manual

Page: 39 / 170

Document reference MAODS301/E USER MANUAL
Edition 4 - May 2022 SpeedSys300 ODS301 overspeed detection system
3 - 1
Module details
INSTALLATION OF A SPEEDSYS300 ODS301
3 INSTALLATION OF A SPEEDSYS300 ODS301
This section provides an overview of the installation of SpeedSys300 ODS301 modules
(SpeedSys300 ODS301 overspeed detection system) hardware. This includes module
details such as mounting, grounding and important safety-related information.
NOTE: Installing SpeedSys300 ODS301 modules requires sufficient background in the
installation of electronic equipment in an industrial environment.
Knowledge of the installation of field wiring and protective earth (PE),
instrument earth (IE) and intrinsically safe earth (IS) is also required.
3.1 Module details
As shown in Figure 2-1 , the front panel of the SpeedSys300 ODS301 module identifies the
module and its connectors, LEDs, and the USB configuration port.
The front panel of the SpeedSys300 ODS301 module identifies the function of each
connector and each connector’s pinout. See
2.2 SpeedSys300 ODS301 module connectors
and Figure 2-1 .
LEDs on the front panel of the SpeedSys300 ODS301 module are used to indicate the status
and behaviour of the input signals to the module and the module itself. See
2.1 SpeedSys300
ODS301 module LEDs .
The Power LED indicates if the module has booted correctly and is operating normally
(see
Table 2-1 ).