USER MANUAL
Document reference MAODS301/E
SpeedSys300 ODS301 overspeed detection system
Edition 4 - May 2022
5 - 18
Event log tab
COMMISSIONING OF A SPEEDSYS300 ODS301
Each diagnostic error is identified by a unique hexadecimal error bit/code (Code (HEX)). If
multiple errors occur at the same time, the codes are logically combined.
NOTE:
Holding the mouse pointer mouse over an error in the Event log table (left) will
highlight the associated errors in the Error codes summary (right).
For further information on each error code, see
Appendix E: SpeedSys300 ODS301
•
Load event log
Use the Load event log button/command to load the log of most recent events from the
SpeedSys300 ODS301 module and display them in a table on the Event log tab (left).
•
Export event log
Use the Export event log button/command to export the event log to a comma separated
values file (
*.csv
).
Summary of Contents for vibro-meter SpeedSys300 ODS301
Page 118: ...THIS PAGE INTENTIONALLY LEFT BLANK...
Page 126: ...THIS PAGE INTENTIONALLY LEFT BLANK...
