Meggitt vibro-meter SpeedSys300 ODS301, User Manual, Page: 85 / 170

Document reference MAODS301/E USER MANUAL
Edition 4 - May 2022 SpeedSys300 ODS301 overspeed detection system
5 - 15
Device status tab
COMMISSIONING OF A SPEEDSYS300 ODS301
5.7.2 Device status tab – Error status
On the bottom of the window, the error status is displayed. All current errors are displayed
together with their respective error codes. Past errors are stored in the error memory to give
the user the ability to identify potential problems/risks that are caused by short-term
malfunctions or that remain undetected due to the short duration.
NOTE: The individual error codes are defined in the Error codes summary displayed on
the Event log tab (see
5.9 Event log tab ).
For further information on each error code, see Appendix E: SpeedSys300 ODS301
diagnostic error codes .
• Reset error memory
Use the Reset error memory button/command to clear the status errors stored by the module.