Meggitt vibro-meter SpeedSys300 ODS301, User Manual

Page: 168 / 170

USER MANUAL Document reference MAODS301/E
SpeedSys300 ODS301 overspeed detection system Edition 4 - May 2022
F - 26
Parameters and configuration settings
APPENDIX F: SPEEDSYS300 ODS301 MODBUS REGISTER DEFINITIONS
5616 r1_acc_max_hyst single
acc_min to
acc_max
Level 1
Relay 1 max. acceleration alarm hysteresis.
Range defined in ‘Output config - factory’.
5618 r2_acc_max_hyst single
acc_min to
acc_max
Level 1
Relay 2 max. acceleration alarm hysteresis.
Range defined in ‘Output config - factory’.
5620 r3_acc_max_hyst single
acc_min to
acc_max
Level 1
Relay 3 max. acceleration alarm hysteresis.
Range defined in ‘Output config - factory’.
5622 r4_acc_max_hyst single
acc_min to
acc_max
Level 1
Relay 4 max. acceleration alarm hysteresis.
Range defined in ‘Output config - factory’.
5624 do_acc_max_hyst single
acc_min to
acc_max
Level 1
Digital out max. acceleration alarm
hysteresis.
Range defined in ‘Output config - factory’.
5626 r1_acc_min_hyst single
acc_min to
acc_max
Level 1
Relay 1 min. acceleration alarm hysteresis.
Range defined in ‘Output config - factory’.
5628 r2_acc_min_hyst single
acc_min to
acc_max
Level 1
Relay 2 min. acceleration alarm hysteresis.
Range defined in ‘Output config - factory’.
5630 r3_acc_min_hyst single
acc_min to
acc_max
Level 1
Relay 3 min. acceleration alarm hysteresis.
Range defined in ‘Output config - factory’.
5632 r4_acc_min_hyst single
acc_min to
acc_max
Level 1
Relay 4 min. acceleration alarm hysteresis.
Range defined in ‘Output config - factory’.
5634 do_acc_min_hyst single
acc_min to
acc_max
Level 1
Digital out min. acceleration alarm
hysteresis.
Range defined in ‘Output config - factory’.
5636 acc_cutoff_speed single
v_min to
v_max
Level 1
Minimal speed for acceleration alarm
processing. Below this speed acceleration
alarms are not evaluated.
5638 aout_v_4ma single 0 to 2100000 Level 1
Speed value for 4 mA output.
Range defined in ‘Output config - factory’.
5640 aout_v_20ma single 0 to 2100000 Level 1
Speed value for 20 mA output.
Range defined in ‘Output config - factory’.
5642 aout_max single 3.6 to 21.0 Level 1 Max limit value for Aout swing
5644 aout_min single 3.6 to 21.0 Level 1 Min limit value for Aout swing
5646 aout_error single 0 to 3.6 Level 1
Analog output error value
(that is, output value in safe state)
5648 Reserved uint16 Level 1
5649 crc_out_adm uint16 Level 1 Parameter block CRC
Table F-13: SpeedSys300 ODS301 Modbus registers – output configuration – admin (continued)
Address Name
Data
type
Range Access Description