MD Helicopters MD900 with PW206E, Flight Manual

Page: 142 / 450

CSP–900RFM206E–1
ROTORCRAFT FLIGHT MANUAL
MD900 With PW 206E
Normal Procedures
FAA Approved
Original
4–28
4–12.ENGINE/AIRCRAFT SHUTDOWN – NORMAL
NOTE
: Shut down the engines before exiting the helicopter unless safety or operational
considerations dictate otherwise.
Maximum demonstrated wind speed for starting and stopping the rotor is 50
knots.
F
Collective stick
FULL DOWN; FRICTION ON
F
Cyclic stick TRIM TO NEUTRAL
(REF FIGURE 4–9)
F Pedals
NEUTRAL
F
Engine control panel
F F L ENGINE and R ENGINE
SET TO IDLE
F
All unnecessary electrical equipment OFF
F
Utility panel:
F F Heat OFF
F F AC (if installed) OFF
F F IPS (if installed)
OFF
F F Pitot heat OFF
F Lighting control panel
AS DESIRED
F
Electrical master panel:
F F
Avionics master switch OFF
F F L GEN/R GEN switches
OFF
F
Fuel system panel:
F F L BOOST/R BOOST
OFF
F
Engine control panel:
F F L ENGINE and R ENGINE
OFF
F
ENG OUT indications CHECK IIDS
Do not use collective pitch to slow rotor.
CAUTION