MD Helicopters MD900 with PW206E, Flight Manual

Page: 139 / 450

CSP–900RFM206E–1
Normal Procedures
ROTORCRAFT FLIGHT MANUAL
MD900 With PW 206E
FAA Approved
Original
4–25
F
IIDS
CHECK FOR NORMAL INDICATIONS
NOTE
: Do not start second engine until at least 60% N
R
is attained on the first engine.
F
Repeat starting procedure for second engine
F
GPU start only:
F F L GEN/R GEN ON
F F GPU
DISCONNECT
4–6. ENGINE RUNUP
F
Electrical master panel:
F F
Avionics ON, AS DESIRED
F
Engine control panel:
F F L ENGINE and R ENGINE FLY
4–7. BEFORE TAKEOFF
F
Cyclic response check:
F F
Move cyclic stick and observe rotor tip for correct movement.
F
Collective friction
AS DESIRED
F
Primary and secondary IIDS displays
CHECK ADVISORIES
F
Utility Panel:
F F PITOT HEAT AS REQUIRED
NOTE
: Turn pitot heat ON when visible moisture conditions prevail and OAT is 5
°
C and
below.
F F CAB HEAT AS DESIRED