86
MaxPac Dual/Triple-Screen 8230 XRA2/3-Series User Operation and Maintenance Guide
Figure B-1
Figure B-2
Each of these filters is attached to the main chassis using a combination of a flange on the side of
the filter facing the back of the chassis and a Velcro strip on the side of the filter facing the front of
the chassis.
The filters should be cleaned as mandated by local conditions (a good rule of thumb is when the
filters look physically dirty). The following discussions are based on the left-hand filter. The same
actions apply to the right-hand filter. It is more efficient to clean both filters at the same time.
2) Starting with the filter on the left-hand side of the chassis, break the filter free of the Velcro on the
side of the filter facing the front of the chassis (Figure B-3).
Figure B-3
Figure B-4
3) Unscrew the knurled knob holding the left-hand filter assembly as shown in Figure B-4 (this may
require the use of a Phillips #2 screwdriver).
4) Open the assembly as illustrated in Figure B-5.
Summary of Contents for 8230 XRA2 series
Page 6: ......
