MaxPac Dual/Triple-Screen 8230 XRA2/3-Series User Operation and Maintenance Guide
65
5) Use a Phillips #1 screwdriver to remove the three 4-40 screws holding the wire harness
protector plate (Figure 3-82), then gently remove the protector plate to expose the wire
harness (Figure 3-83).
Figure 3-82
Figure 3-83
6) Disconnect the power connector to the main distribution board – make sure to use the
connector's release catch (Figure 3-84).
Figure 3-84
7) Use a Phillips #2 screwdriver to remove the four screws attaching the power supply unit to the
side of the inner chassis (Figures 3-85 through 3-88).
Figure 3-85
Figure 3-86
Summary of Contents for 8230 XRA2 series
Page 6: ......
