58
MaxPac Dual/Triple-Screen 8230 XRA2/3-Series User Operation and Maintenance Guide
Figure 3-53
Figure 3-54
7) Cut the cable tie holding the main motherboard power cable (so as to keep it out of the way) as
illustrated in Figure 3-54.
8) Gently lift the auxiliary power distribution assembly up and away from the inner chassis
(Figure 3-55).
Figure 3-55
9) Take the new auxiliary power distribution assembly supplied by MaxVision support and
incorporate it into the system by performing the steps described above in reverse order.
Main Power Distribution Board
Note:
Return the system to MaxVision as described in
Appendix D
. Do not attempt to replace the
main power distribution board in the field unless you have been trained and certified for such a
procedure.
Hard Drive Magazine (also Individual Hard Drives)
1) Undo the knurled screw holding the middle binding bar (Figure 3-56) and then remove the binding
bar (Figure 3-57).
Summary of Contents for 8230 XRA2 series
Page 6: ......
