MaxPac Dual/Triple-Screen 8230 XRA2/3-Series User Operation and Maintenance Guide
9
Figure 1-22
Powering-Up Your MaxPac
1) Ensure that the main (hard) power switch – the switch located just to the right of the main power
input connector – is in its ON position (Figure 1-23).
Note:
When the unit is being moved or serviced, you should ensure that the main power switch
is in its OFF position.
Figure 1-23
Figure 1-24
2) Press and release the soft power switch located at the top of the system immediately behind the
center display screen (Figure 1-24)
3) Due to extensive system initialization and verification checks, the BIOS boot-up process can take
a significant amount of time, especially in the case of systems with large amounts of memory. In
the case of a system containing 8 GB of RAM, for example, it can take 45 seconds before all
three LEDs above the numerical keypad on the keyboard flash to indicate that the system is at a
point where information should start to appear on the main display.
Note:
Even if nothing appears on the main display, the fact that the three LEDs flash on the
keyboard indicate that the system is alive.
Summary of Contents for 8230 XRA2 series
Page 6: ......
