36
MaxPac Dual/Triple-Screen 8230 XRA2/3-Series User Operation and Maintenance Guide
21) Click the
Recovery
item to be presented with the first page from the
Restore Data Wizard
(Figure 2-58).
22) Click the
Next
button to be presented with the
Archive Selection
screen (Figure 2-59).
Figure 2-59
Figure 2-60
23) Ensure that the
CD Drive
item in the left-hand selection pane is expanded (if not, click the '+'
icon next to this item) and then use the mouse to click on the image (*.tib) file you will see there
(Figure 2-59).
Note:
In the case of a multi-CD/DVD image set, the system will present you with a message
saying that this is not the last created volume in the archive and requesting you to insert the
last created volume. In this case, replace the current CD/DVD with the last disk from the set,
click on the *.tib file on this disk, and proceed to point 24 (at some stage you will be prompted
to return to the first disk).
24) Click the
Next
button to be presented with the
Restoration Type Selection
page (Figure 2-60).
25) Select the
Restore Disks or Partition
item and then click the
Next
button to be presented with
the
Partition or Disk to Restore
page (Figure 2-61).
Figure 2-61
Figure 2-62
26) Select the
NTFS (C)
option (a tick-mark indicates that the option has been selected) and then
click the NEXT button to be presented with the
Restored Partition Location
page (Figure 2-62).
Summary of Contents for 8230 XRA2 series
Page 6: ......
