75
1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
STEP 15 - SECURING COLUMNS - Continued
FIG. 75-1
MOUNTING
PLATE
RH COLUMN
UPPER BOLT HOLE
FIG. 75-1A
NOTE:
Skip this step if using the
METHOD 3
weld-on version of installation with no
mounting plates.
RH COLUMN
5.
Get (2)
fl
ange hex bolts, (2)
fl
ange lock nuts (if needed),
and (2)
fl
at washers (if need-
ed) from parts bag. Then,
install (1) bolt, (1) nut (if
needed), and (1)
fl
at washer
(if needed) through mounting
plate and RH column
(FIGS.
75-1, 75-1A and 75-1B)
Re-
peat for LH column.
LOWER BOLT HOLE
FIG. 75-1B
NOTE:
MAXON recommends
using the upper bolt hole
(FIG. 75-1A)
to attach
mounting plate. Howev-
er, if the upper hole will
be covered by vehicle
corner post, then use
the lower bolt hole
(FIG.
75-1B)
.
FLANGE HEX
BOLT, 5/8”-11 X
1-3/4” LG.
FLANGE HEX
BOLT, 5/8”-11 X
1-3/4” LG.
FLAT
WASHER, 5/8”
FLANGE LOCK
NUT, 5/8-11”
METHOD 1 & METHOD 2
6.
Torque 5/8”-11 bolts to
170
lb-ft
. Repeat for LH column.
Summary of Contents for BMR-CS
Page 103: ......
