24
1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
3.
Position LH mounting plate on vehicle body as shown in
FIGS. 24-1, 24-1A, and 24-1B
.
STEP 3 - POSITION LIFTGATE - Continued
NOTE:
Installer can use either set of dimensions shown in
FIG. 24-1
to install RH
mounting plate. The
fi
rst set of dimensions is taken from the center of each
hanger, and the second set of dimensions is taken from the inner edge of
the mounting plates.
METHOD 1 - PRE-INSTALL MOUNTING PLATES
AND EXTENSION PLATE ON VEHICLE - Continued
91-1/4” + 3/16” / - 1/16” (96” WIDE VEH)
96-1/4” + 3/16” / - 1/16” (102” WIDE VEH)
(IF MOUNTING JIG USED)
87-1/4” + 3/16” / - 1/16” (96” WIDE VEH)
92-1/4” + 3/16” / - 1/16” (102” WIDE VEH)
(DIMENSIONS TAKEN FROM INNER EDGE
OF MOUNTING BRACKETS)
LH MOUNTING
PLATE
FIG. 24-1A
FIG. 24-1
RH MOUNTING
PLATE
FIG. 24-1B
EXTENSION PLATE
TOP HANGER
TOP HANGER
TOP HANGER
TOP HANGER
RH MOUNTING
PLATE
LH MOUNTING
PLATE
INNER EDGE
INNER EDGE
VEHICLE
BODY
Summary of Contents for BMR-CS
Page 103: ......
