54
1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
O-RING
RUN ELECTRIC CABLES
STEP 8 - RUN HYDRAULIC LINES & ELECTRIC CABLES
- Continued
2.
Check that O-ring is in position and there
is no dirt or debris on the O-ring or in the
connector with sockets
(FIG. 54-1)
.
CHECKING CONNECTOR O-RING
FIG. 54-1
GREEN
CONNECTOR
4.
Apply a thin coating of dielectric grease
around the outer face of the connector
with pins, as shown in
FIG. 54-2
.
APPLYING DIELECTRIC GREASE TO CONNECTOR
FIG. 54-2
CAUTION
Do
NOT
apply any dielectric grease to
the pins or inside the connectors.
DIELECTRIC
GREASE
3.
Slide a 2” long piece of 1” diameter heat
shrink sleeving
(P/N 905189-04 in parts
box)
over the connector.
Summary of Contents for BMR-CS
Page 103: ......
