SAFETY INSTRUCTIONS
www.maxcessintl.com
DLCA NET-S1
MI 850A374 1 A
Page 11 of 67
2.3
Basic safety information
Proper use
The DLCA NET-S1 load cell amplifier is intended to be used
on machines or systems to amplify the signal from MAGPOWR
or competitor load cells.
For indoor operation, see environmental specifications on
page 64.
Improper use
-
Operation outside the technical specifications
-
Operation in an Ex-area or intrinsically safe area.
-
Outdoor operation.
-
Any other use than the proper use shall be deemed
inappropriate.
Installation and commissioning
-
Any digital load cell amplifier which is damaged must not
be installed or put into operation.
-
Only perform installation, maintenance or repair tasks on
the digital load cell amplifier when the machine into which
the DLCA NET-S1 is installed has been stopped and is
secured from being turned on.
-
Only perform installation, maintenance or repair tasks on
the digital load cell amplifier when there is no electrical
power in the system.
-
The digital load cell amplifier must be securely mounted
before being placed in operation.
-
Only replacement parts obtained from Maxcess may be
used.
-
No modifications may be made to the digital load cell
amplifier.
-
Do not place electrical cables under mechanical strain.
WARNING – Death or injury can result from static electric
shocks.
Moving webs of material can produce large static voltage
potentials. Protect against electric shocks by installing a
conductive connection between the terminal marked with the
PE symbol TB1.3 and the PE circuit of the building or machine.
