Matrix
170
Vision System Manual
numbers. An outgoing call will be stored only if the destination matches with one of the numbers from the list.
Thus, it is also possible to store only the international or long distance calls or calls made to an ISP, etc.
The list of 16 numbers looks like:
Index
Number
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Use following command to program a number in the list:
1513-1-Index-Number-#*
Where,
Index is from 00 to 15.
Number is a string of maximum 16 digits.
Use following command to default all the numbers in the list:
1513-*-#
Duration wise
Sometimes it is required to filter out the calls of small durations.
Use following command to set the filter for call duration:
1514-Minutes-Seconds
Where,
Minutes is from 00 to 59.
Seconds is from 00 to 59.
Supportive commands:
If an outgoing call is transferred from one station to another station, it can be stored either as one call or two
different calls.
Use following command to decide this:
1515-Call Split Flag
Where,
Call Split Flag Meaning
0
Store one call
1
Store multiple calls
If above option is selected as ‘Store One Call’. It is possible to store the call with originating station or
terminating station.
Summary of Contents for EPABX Vision-206S
