Matrix EPABX Vision-206S System Manual Download

Page: 61 / 235

Vision System Manual

Matrix

Call Splitting

What’s this?

• This feature enables you to talk to two persons alternately.
• Call Splitting is also known as Hold-Consult or Hold-Toggle.

How to use it?

Call Splitting can be used in any of the following three combinations:
1. Two stations.
2. One station and one trunk.
3. Two trunks.

Call Splitting between two stations:

Speech with station.

Dial

Flash.

Dial tone. Called station goes on Hold.

Dial another

Station.

Ring back tone

Speech with the station when the call is answered.

Dial

Flash-1.

Speech with held party.

Call Splitting between a station and a trunk:

Speech with trunk.

Dial

Flash.

Dial tone. External party goes on Hold.

Dial

Station.

Ring back tone

Speech with the station when the call is answered.

Dial

Flash-1.

Speech with held party.

Call Splitting between two trunks:

Speech with trunk.

Dial

Flash.

Dial tone. Trunk goes on Hold.

Dial

Feature tone

Dial

grab another trunk.

Trunk dial tone

Dial

Telephone Number.

Ring back tone

Speech with called party when the
call is answered.

Dial

Flash-1.

Speech with held party.

How to program?

Call Splitting is a programmable feature. Please refer Class of Service (COS) for details on how to allow Call
Splitting to a user.

Important Points:

• Only one of the two persons will be in conversation with you at a time. The third person is on hold. He gets

music and cannot hear your conversation.

• When in speech with a station and getting external call waiting tone, you can dial Flash to answer the trunk

call. The station is put on hold and gets music. Now, you can split between the two persons.

• Interrupting station can also be answered very much in the same way as described above. Your current call

is put on hold and speech with the interrupting station is established. Once again, you can split between the
two persons.

• Conference can be invoked to include both the parties by dialing

Flash-0.

• A is in speech with B. A holds B and calls C. A and C are in speech. B is the hold party. Now A wants to call

Summary of Contents for EPABX Vision-206S












































































































































































































































Search results

Summary of Contents for EPABX Vision-206S

Reviews:

Related manuals for EPABX Vision-206S

Brands by name

Popular brands

Matrix EPABX Vision-206S, System Manual

Search results

Summary of Contents for EPABX Vision-206S

Reviews:

Related manuals for EPABX Vision-206S

Brands by name

Popular brands