manualshive.com logo in svg

Matrix EPABX Vision-206S, System Manual

The Matrix EPABX Vision-206S is a versatile communication system designed for small to medium-sized businesses. Easily manage calls with advanced features such as call forwarding, conference calling, and voicemail. For detailed instructions on setting up and using this system, download the free System Manual from manualshive.com.

Share
Download
background image

Matrix

226

Vision System Manual

Relay Port does not operate

• Please check the connections made.
• Please check for the polarity. Refer to the figure shown in topic “Relay Port”.
• Please check for any open circuit in the wiring.

Security Dialer does not work

• Please check the connections of the Panic Switch/Sensor to the Digital Input Port.
• Please check for any open circuit in the wiring.
• Please check the programming for Security Dialer.
• Please contact authorized Matrix dealer.

=X=X=

Summary of Contents for EPABX Vision-206S












































































































































































































































Reviews:

No comments

Related manuals for EPABX Vision-206S

Brands by name

Popular brands

Load more brands