Matrix EPABX Vision-206S, System Manual

Page: 177 / 235

Vision System Manual 177
Matrix
Station Parameters
What’s this?
• In an organization, all the stations cannot have same characteristics. Each station differs from the other in
one respect or the other like Flexible number, Toll Control, Class of Service, Flash timer, Station name, etc.
• Following parameters should be programmed along with above-mentioned parameters for smooth
functioning of the system:
Port Type
A station port can be defined as a normal port or a CLI port.
Normal port:
The system does not send the Calling Number Identification to this port. Any type of telephone
instrument can be connected to this port.
CLI port:
The system sends the Calling Number Identification to this port (However, any type of telephone
instrument can be connected this port). A CLI phone should be connected to it.
Use following command to program the port type for a station:
4101-1-Station-Port Type
Where,
Station is the software port number of the station from 00 to 08.
Port Type Meaning
0 Normal Port
1 CLI Port
Use following command to program same port type for all the stations:
4101-*-Port Type
By default, Station port type is CLI port.
Station Parameter Report
Use following command to download station parameters of a station:
4100-1-Station
Where,
Station is the software port number is from 00 to 08.
Use following command to download station parameters of all the stations:
4100-*
Station parameters for two stations are attached herewith for ready reference.
Timer for Relevance:
Internal Inter Digit Wait Timer-
This timer signifies the time for which the system waits for the next digit during
dialing internal numbers and features.
Command :
3009-Seconds
Default : 7 seconds.
Valid Range : 000 to 255 seconds.
Relevant Topics:
1. Class of Service (COS) 70
2. Toll Control 184
3. Trunk Access Groups 189
4. Dial by Name 91
5. Call Pick Up 57