MARUTI SUZUKI Vitara Brezza, Manual

Page: 166 / 366

5-27
OTHER CONTROLS AND EQUIPMENT
82PH0-74E
Blower speed selector (2)
82PH054
The blower speed selector (2) is used to
turn on the blower and to select blower
speed.
If the “AUTO” switch (8) is pushed, the
blower speed will vary automatically as the
climate control system maintains the
selected temperature.
Air intake selector (3)
82PH055
Push the air intake selector (3) to change
between the following modes.
If the “AUTO” switch (8) is pushed, the air
intake will vary automatically as the climate
control system maintains the selected tem-
perature.
NOTE:
When you select the recirculated air mode,
the automatic operation system is deacti-
vated if you push the “AUTO” switch (8).
RECIRCULATED AIR (a)
When this mode is selected, outside air is
shut off and inside air is recirculated. This
mode is suitable when driving through an
area with polluted air such as a tunnel, or
when attempting to quickly cool down the
vehicle.
FRESH AIR (b)
When this mode is selected, outside air is
introduced.
The fresh air position (b) and recirculated
air position (a) are selected alternately
each time the air intake selector is pushed.
NOTE:
If you select the recirculated air position (a)
for an extended period of time, the air in
the vehicle can become contaminated.
Therefore, you should occasionally select
the fresh air position (b).
(2)
(b)
(a)
(3)