MARUTI SUZUKI Vitara Brezza, Manual

Page: 233 / 366

7-12
INSPECTION AND MAINTENANCE
82PH0-74E
Gear Oil Change
Since special procedures, materials and
tools are required, it is recommended that
you trust this job to your authorised Maruti
Suzuki workshop.
Clutch Pedal
Fluid Control Clutch
64MS141
Check the clutch pedal for smooth opera-
tion and clutch fluid level from time to time.
If clutch dragging is felt with the pedal fully
depressed, have the clutch inspected by
your authorised Maruti Suzuki workshop. If
the clutch fluid level is near the “MIN” line,
fill it up to the “MAX” line with Maruti Genu-
ine Brake Fluid (MGBF) or DOT 3.
We highly recommend to use “Maruti Gen-
uine Brake Fluid” (MGBF).
Fuel Filter
82PM07023
The fuel filter works as a water sedimentor
as well.
Drain water according to the Periodic
Maintenance Schedule. To drain water:
1) Place a pan or ample rag under the fuel
filter drain nozzle.
2) Loosen the drain knob (1). The water
will be drained.
3) Tighten the drain knob (1) when the
water changes to the diesel fuel.
4) Tighten the drain knob (1).
Tightening torque for drain knob
2.5 Nm (0.25 kg-m, 1.84 lb-ft)
CAUTION
After driving the vehicle, the
transaxle oil temperature may be
high enough to burn your skin. Wait
until the oil filler plug is cool enough
to touch with your bare hands before
inspecting transaxle oil.
NOTICE
When tightening the plug, apply the
following sealing compound or
equivalent to the plug threads to pre-
vent oil leakage.
Manual transaxle sealant:
MARUTI SUZUKI Bond No. “1216E”
or “1217G”
MAX
MIN
(1)