MARUTI SUZUKI Vitara Brezza, Manual

Page: 91 / 366

2-72
BEFORE DRIVING
82PH0-74E
Windshield Wipers
76MH0A049
To turn the windshield wipers on, move the
lever down to one of the three operating
positions. In the “INT” position, the wipers
operate intermittently. The “INT” position is
very convenient for driving in mist or light
rain. In the “LO” position, the wipers oper-
ate at a steady low speed. In the “HI” posi-
tion, the wipers operate at a steady high
speed. To turn off the wipers, move the
lever back to the “OFF” position.
Move the lever up and hold it to the “MIST”
position, the windshield wipers will turn on
continuously at low speed.
Windshield Wipers with Rain Sens-
ing Function (if equipped)
64MS065
Press the engine switch to change the igni-
tion mode to “ON”. To turn the rain-sensing
wipers on, move the lever down to one of
the three operating positions. In the
“AUTO” position (if provided), the wipers
automatically operate when the wiper sys-
tem senses rain or snow. In the “LO” posi-
tion, the wipers operate at a steady low
speed. In the “HI” position, the wipers
operate at a steady high speed. To turn off
the wipers, move the lever back to the
“OFF” position.
Move the lever up and hold it to the “MIST”
position; the wipers will operate continu-
ously at low speed for as long as you hold
the lever in the “MIST” position.
64MS066
If the control lever has an “AUTO” position,
you can change the system’s sensitivity to
rain/snow by turning the knob of the con-
trol lever forward (+) for increased sensitiv-
ity or rearward (
– ) for decreased
sensitivity.
61M0219
(1) Rain sensor
EXAMPLE
MIST
HI
OFF
LO
AUTO
EXAMPLE
EXAMPLE
(1)