MARUTI SUZUKI Vitara Brezza, Manual

Page: 232 / 366

7-11
INSPECTION AND MAINTENANCE
82PH0-74E
Coolant Replacement
Since special procedures are required, we
recommend you take your vehicle to your
authorised Maruti Suzuki workshop for
coolant replacement.
Air Cleaner
If the air cleaner is clogged with dust, there
will be greater intake resistance, resulting
in decreased power output and increased
fuel consumption.
82PM07003
Unscrew the mounting screws (1) and
remove the element from the air cleaner
case. If the element appears to be dirty
clean the element or replace it with a new
one as per periodic maintenance sched-
ule. Ensure proper fitment of gasket after
air cleaning element cleaning or replace-
ment.
Tightening torque (1):
3 Nm (0.3 kg-m, 2.2 lb-ft)
Gear Oil
Manual Transaxle Oil
When adding gear oil, use gear oil with the
appropriate viscosity and grade as shown
in the chart below.
We highly recommend you use:
“MARUTI GENUINE GEAR OIL
75W-80 ”
for manual transaxle gear oil.
Manual transaxle oil
68LM728
Gear Oil Level Check
52LM021
(1) Oil filler and level plug
To check the gear oil level, use the follow-
ing procedure:
1) Park the vehicle on a level surface with
the parking brake applied. Then, stop
the engine.
2) Remove the oil filler and level plug.
3) If gear oil flows from the plug hole, the
oil level is correct. Reinstall the plug. If
gear oil does not flow from the plug
hole, add oil through the filler plug hole
until oil flows a little from the plug hole.
Tightening torque (1):
21 Nm (2.1 kg-m, 15.5 lb-ft)
(1)
(1)
EXAMPLE
C
F
o
o
-30
-22 -20
-4
-10
14 32 50 68 86 104
0 10 20 30 40
75W-80
(1)
EXAMPLE