MARUTI SUZUKI Vitara Brezza, Manual

Page: 20 / 366

2-1
BEFORE DRIVING
82PH0-74E
Keys
54G489
Your vehicle comes with a pair of keys.
The key(s) may or may not be equipped
with a transmitter depending on model
variant. Keep the spare key in a safe
place. One key can open all of the locks on
the vehicle.
The key identification number is stamped
on a metal tag provided with the keys or on
the keys. Keep the tag (if equipped) in a
safe place. If you lose your keys, you will
need this number to have new keys made.
Write the number below for your future ref-
erence.
Immobilizer System
This system is designed to help prevent
vehicle theft by electronically disabling the
engine starting system.
The engine can be started only with your
vehicle’s original immobilizer ignition key
or keyless push start system remote con-
troller which has an electronic identification
code programmed into it. The key or
remote controller communicates the identi-
fication code to the vehicle when the igni-
tion switch is turned to the “ON” position or
the engine switch is pressed to change the
ignition mode to “ON”. If you need to make
spare keys or remote controllers, see your
authorised Maruti Suzuki workshop. The
vehicle must be programmed with the cor-
rect identification code for the spare. A key
made by an ordinary locksmith will not
work.
65D239
If the immobilizer system light blinks when
the ignition switch is in the “ON” position or
the ignition mode is “ON”, the engine will
not start.
For vehicles without keyless push start
system
If this light blinks, turn the ignition switch to
the “LOCK” position, then turn it back to
the “ON” position.
If the light still blinks after the ignition
switch is turned back to the “ON” position,
there may be something wrong with your
key or with the immobilizer system. Ask
your authorised Maruti Suzuki workshop to
have the system inspected.
For vehicles with keyless push start
system
If this light blinks, change the ignition mode
to “LOCK” (OFF), then change back to
“ON”. Also refer to “If the PUSH indicator
light blinks and the engine cannot be
started” in “Starting the Engine (Vehicle
with Keyless Push Start System)” in the
“OPERATING YOUR VEHICLE” section.
If the light still blinks after the ignition mode
is changed back to “ON”, there may be
something wrong with your key or with the
immobilizer system. Ask your authorised
Maruti Suzuki workshop to have the sys-
tem inspected.
The immobilizer system light may also
blink if the remote controller is not in the
vehicle when you close the door or attempt
to start the engine.
KEY NUMBER:
EXAMPLE