MARUTI SUZUKI Vitara Brezza, Manual

Page: 177 / 366

5-38
OTHER CONTROLS AND EQUIPMENT
82PH0-74E
Selecting the FM/AM band
Press the FM/AM button (1).
Each time the button is pressed, the recep-
tion band will change as follows:
Seek tuning
Press the seek Up button (2) or the seek
Down button (3).
The unit stops searching for a station at a
frequency where a broadcast station is
available.
Manual tuning
Turn the TUNE FOLDER, knob (4).
The frequency being received is displayed.
Preset memory
1) Select the desired station.
2) Hold down a desired button ([1] to [6])
of the Preset buttons (5) to which you
want to store the station for 2 seconds
or longer.
Auto store
Hold down the /AST button (6) for 1 sec-
onds or longer.
Six stations in good reception will automat-
ically be stored to the Preset buttons (5) in
order, starting from a station whose fre-
quency is the lowest.
NOTE:
• Auto store can be released by pressing
AST button (6) while auto store is under
way.
• When the auto store is performed, the
station previously stored in the memory
at the position is overwritten.
• When there are fewer than 6 stations
that can be stored even if 1 round of
auto store operation is performed, no
station will be stored at the remaining
Preset buttons (6). Remaining preset
displays “------”.
• 6 stations can be preset for FM1 and
FM2 in common, and 6 stations for AM
in auto store mode.
Radio Reception
Radio reception can be affected by envi-
ronment, atmospheric conditions, or radio
signal’s power and distance from the sta-
tion. Nearby mountains and buildings may
interfere or deflect radio reception, causing
poor reception. Poor reception or radio
static can also be caused by electric cur-
rent from overhead wires or high voltage
power lines.
FM1 FM2 AM