MARUTI SUZUKI Vitara Brezza Manual Download Page 198

Page: 198 / 366

5-59

OTHER CONTROLS AND EQUIPMENT

82PH0-74E

NOTE:
• When selecting “Go Back” option or

button, the previous menu will be dis-
played.

• Pressing “Choose Preset” after selecting

“Add Speed Dial” can register the
selected number in the speed dial.

• Pressing “Confirm” after selecting

“Delete” can delete the selected number
from the call history.

Deletion of call history

Follow the instructions below to delete a
missed/incoming/outgoing call history.
1) Press the Bluetooth

setup button (4).

Turn the TUNE FOLDER, knob (1).
Select “Setup telephone” and press the
knob (1) to determine the selection.

2) Turn the TUNE FOLDER, knob (1) to

select “Setup Phonebook”, and press
the knob (1) to determine the selection.

3) Turn the TUNE FOLDER, knob (1) to

select “Delete History”, and press the
knob (1) to determine the selection.

4) Turn the TUNE FOLDER, knob (1) to

select “Outgoing Calls”, “Incoming
Calls”, “Missed Calls” or “ALL Calls”,
and press the knob (1) to determine the
selection.

5) Turn the TUNE FOLDER, knob (1) to

select a number to be deleted or “ALL
Calls”, and press the knob (1) to deter-
mine the selection.

6) Select “Delete?” or “Delete All?”, in

case of “ALL” will be selected and press
the knob (1) to determine the selection.

7) Turn the TUNE FOLDER, knob (1) to

select “Confirm”, and press the knob (1)
to complete the deletion.

NOTE:
When selecting “Go Back” option or but-
ton, the previous menu will be displayed.

Deletion of registered data (Delete
Entry)

Follow the instructions below to delete a
number registered in Phonebook.
1) Press the Bluetooth

setup button (4).

The Bluetooth

setup menu will be dis-

played.

2) Turn the TUNE FOLDER, knob (1) to

select “Setup Telephone”, and press
the knob (1) to determine the selection.

3) Turn the TUNE FOLDER, knob (1) to

select “Setup Phonebook”, and press
the knob (1) to determine the selection.

4) Turn the TUNE FOLDER, knob (1) to

select “Delete Contacts”, and press the
knob (1) to determine the selection.

5) Turn the TUNE FOLDER, knob (1) to

select the initial of the name of the reg-
istered number to be deleted or “ALL”
and press the knob (1) to determine the
selection.

6) Select “Delete?” or “Delete All?”, and

press the knob (1) to determine the
selection.

7) Turn the TUNE FOLDER, knob (1) to

select “Confirm”, and press the knob (1)
to complete the deletion.

NOTE:
When selecting “Go Back” option or but-
ton, the previous menu will be displayed.

Display of device data (Device Name)

Follow the instructions below to display the
BD (Bluetooth

Device) address and

device name.
1) Press the Bluetooth

setup button (4).

The Bluetooth

setup menu will be dis-

played.

2) Turn the TUNE FOLDER, knob (1) to

select “Setup Bluetooth”, and press the
knob (1) to determine the selection.

3) Turn the TUNE FOLDER, knob (1) to

select “Bluetooth Info”, and press the
knob (1) to determine the selection.

4) Select “Device Name” or “Device

Address”, and press the knob (1) to dis-
play the device name or the BD (Blue-
tooth

Device) address.

NOTE:
When selecting “Go Back” option or but-
ton, the previous menu will be displayed.

Summary of Contents for Vitara Brezza















































































































































































































































































































































































Search results

Summary of Contents for Vitara Brezza

Reviews:

Related manuals for Vitara Brezza

Brands by name

Popular brands

MARUTI SUZUKI Vitara Brezza, Manual

Search results

Summary of Contents for Vitara Brezza

Reviews:

Related manuals for Vitara Brezza

Brands by name

Popular brands