MARUTI SUZUKI Vitara Brezza, Manual

Page: 76 / 366

2-57
BEFORE DRIVING
82PH0-74E
NOTE:
Depending on vehicle’s specifications,
some items may not be displayed.
How to operate the setting mode:
1) Push and hold the indicator selector
knob (2) until the display shows “door”.
2) Turn and/or push the indicator selector
knob (2) to select a function that you
want to set up according to the above
chart.
3) Turn and/or push the indicator selector
knob (2) to register settings of the fol-
lowing functions.
Central door locking system “d1”
• d1-SL1: Unlock all doors by turning the
key, pushing the keyless entry
system transmitter, keyless
push start system remote con-
troller or request switch once
• d1-SL2: Unlock all doors by turning the
key, pushing the keyless entry
system transmitter, keyless
push start system remote con-
troller or request switch twice
(default setting)
Automatic door locking function “d2”
• d2-SL1: Disable the automatic door
locking function
• d2-SL2: Lock all doors when the vehicle
speed reaches 15 km/h
(default setting)
Automatic door unlocking
function “d3”
• d3-SL1: Disable the automatic door
unlocking function (default set-
ting of vehicle with keyless
push start system)
• d3-SL3: (Vehicle with keyless entry sys-
tem) Unlock all doors when the
key is pulled out from the igni-
tion switch (default setting of
vehicle with keyless entry)
(Vehicle with keyless push start
system) Unlock all doors when
the ignition mode is “LOCK”
(OFF)
Door locking and unlocking siren “d5”
• d5-SL1: Siren sounds when the door(s)
is(are) locked or unlocked by
using the keyless entry system
transmitter, keyless push start
system remote controller or
request switch (default setting)
• d5-SL2: Siren does not sound when the
door(s) is(are) locked or
unlocked by using the keyless
entry system transmitter, key-
less push start system remote
controller or request switch
Footwell light setting “L1”
• L1-SL1: Footwell light comes on when
any of doors is open or head-
lights are on
• L1-SL2: Footwell light comes on when
any of doors is open (default
setting)
• L1-SL3: Disable the footwell light
Additional flashes
of the turn signal “L2”
• L2-SL1: Turn signal flashes three times
after the turn signal lever is
returned (default setting)
• L2-SL2: Disable the additional flashes
of turn signal
Shock sensor “S2”
• S2-SL1: Enable the shock sensor
• S2-SL2: Disable the shock sensor
(default setting)
Pre-warning sensitivity of
the shock sensor “S3”
• S3-L00: Disable the pre-warning
• S3-L01 to L15:
Adjust the pre-warning sensitiv-
ity of shock sensor (Lowest
sensitivity level is L01 and
highest is L15, and default set-
ting is L14)
Turn the indicator selector knob
(2).
Push the indicator selector
knob (2).