![background image](http://html1.mh-extra.com/html/martin/90523000/90523000_user-manual_1732831006.webp)
6
Installation
I
NSTALLATION
2
This section describes in general terms how to mount the fixture and connect it to
data and AC power. The procedures in this chapter shall be performed by qualified
professionals:
2 “Fiber optic cable” on page 9
3 “Fixture orientation and location” on page 11
A C P O W E R
Do not connect the FiberSource CMY150 to an electrical dimmer system: doing so
can damage the electronics.
Warning!
Disconnect the fixture from AC power before removing any
cover.
Important! Verify voltage and frequency settings before applying power.
P O W E R S U P P L Y S E T T I N G S
The FiberSource CMY150 is factory-wired to one of the configurations shown in
Table 1. The model number and factory settings are printed on the serial number
label which can be found on the base of the fixture. If your local AC voltage or
frequency differ from the settings for your model, the fixture’s power supply must
be rewired by a qualified installer or technician.
Model No.
Voltage
Frequency
90523000
230 V
50 Hz
90523100
120 V
60 Hz
Table 1: Default Power Supply Settings