![background image](http://html1.mh-extra.com/html/martin/90523000/90523000_user-manual_1732831023.webp)
Stand-alone operation
23
S E T T I N G A T I M E R T R I G G E R
Stand-alone operation can be set for one, or two, periods, during a 24 hour period,
using the built-in clock.
If both the clock and the light sensor are used, operation starts, within the times set,
or whenever it is darker than the light-level setting. Operation stops at the stop time
provided that the ambient light is brighter than the light-trigger setting.
The first thing to do is to set the correct time. See “Clock” on page 16.
You can set timer operation for a single period, or for two periods, for example, one
period in the morning, and one period in the evening. To set the timer for a single
period:
1 Select
S t a n d a l o n e
from the Fixture menu.
2 Select
T i m e r
,
T i m e r
,
then
T i m e r
1.
3 Back out to
S t a n d a l o n e .
4 Select
T i m e r
, then
T i m e r
1
5 Select
S t a r t
, then
H o u r
. Use the arrow keys to specify the start hour. Select
O K
.
6 Select
M i n u t e
. Use the arrow keys to specify the start minute. Select
O K
.
7 Select
B a c k
.
8 Select
S t o p
, then
H o u r
. Use the arrow keys to specify the stop hour. Select
O K
.
9 Select
S t o p
, then
M i n u t e
. Use the arrow keys to specify the stop minute.
Select
O K
.
P r o g r a m m i n g e f f e c t s i n s c e n e s
Stand-alone effects can be programmed and stored as scenes. Up to 20 scenes can
be programmed in each fixture. Each scene can contain individual color
characteristics, light intensity, a fade time, and a wait time.