![background image](http://html1.mh-extra.com/html/martin/90523000/90523000_user-manual_1732831004.webp)
4
Introduction
I
NTRODUCTION
1
Thank you for selecting the Martin FiberSource CMY150. The FiberSource
CMY150 is an automated 150-watt color-changing luminaire for illuminating fiber
optic cables in permanent installations. It has a weather-resistant IP rating of 44 that
enables it to be used in outdoor installations. It features seamless CMY color
mixing and full-range continuous dimming. The fixture may be operated with DMX
controllers, in synchronization with other units (with or without a controller), and in
stand-alone mode with programmable start and stop times, and/or light level
activation/deactivation.
U N P A C K I N G
The FiberSource CMY150 comes with a user manual and a Philips MasterColor
CDM-SA/R 150W lamp (installed).
S A F E T Y I N F O R M A T I O N
Warning!
This product is not for household use.
This product presents risks of lethal or severe injury due to fire and heat, electric
shock, ultraviolet radiation, lamp explosion, and falls. Read this manual before
powering or installing the fixture, follow the safety precautions listed below and
observe all warnings in this manual and on the fixture. If you have questions about
how to operate the fixture safely, please contact your Martin dealer or call the
Martin 24-hour service hotline at +45 70 200 201.
G u a r d i n g a g a i n s t e l e c t r i c s h o c k
• Disconnect the fixture from AC power before removing or installing the lamp,
fuses, or any part.
• Always ground (earth) the fixture electrically.
• Use only a source of AC power that complies with local building and electrical
codes and has both overload and ground-fault protection.
• Refer all service to a Martin service technician.