![background image](http://html1.mh-extra.com/html/martin/90523000/90523000_user-manual_1732831031.webp)
Service
31
C L E A N I N G
Wipe off loose dirt with a damp cloth. Clean the housing with a soft brush or sponge
and a mild, non-abrasive car washing detergent.
C l e a n i n g t h e f a n a n d a i r f i l t e r
To maintain adequate cooling, dust must be cleaned from the fan and air filter
periodically.
1 Disconnect the fixture from power.
2 Remove the fixture housing using a 2mm Allen wrench.
3 To remove the air filter, take off the fixture housing, and then remove the two screws
as shown in the following illustration.
4 Remove dust and dirt from the fan blades and air filter using a soft brush, cotton
swab, vacuum, or compressed air.
5 Replace the fixture housing.
The air filter is glued to its support, so washing it is not advised. We recommend the
installation of a new air filter (P/N 62400205) when the lamp is replaced.