![background image](http://html1.mh-extra.com/html/martin/90523000/90523000_user-manual_1732831030.webp)
30
Service
3 Remove the screws on the cover-plate over the lamp and then remove the cover-
plate.
4 Gently remove the lamp from its housing.
5 Remove the old lamp from the connecting plug.
6 Clean the glass bulb and reflector of the new lamp with an alcohol wipe or a clean,
lint-free cloth wetted with alcohol.
7 Holding the new lamp by its base, insert it firmly and squarely into the lamp housing.
8 Gently re-insert the lamp, without winding the wires around the lamp.
If you are instal ling the Osram HQI-R
150W lamp, note that the lamp may not be
o p e r a t e d i n a n y p o s i t i o n o t h e r t h a n
horizontal. When the lamp is installed in the
fixture turn it so that the wires will point
towards the ground when the fixture is
permanently installed. This positions the
filament in the ideal horizontal burning
position. If this is not done the lamp may
deteriorate at an accelerated rate.
9 Connect the wires on the new lamp to the connecting plug.
10 Replace the lamp cover-plate, re-insert and tighten the screws.
11 Replace the fixture housing.