manualshive.com logo in svg

Manitowoc GROVE GMK, Safety Manual

Share
Download
Manitowoc GROVE GMK Safety Manual Download Page 48

4 Information on crane operation
4.3 Information on rigging work

42

3 303 022 en

Safety manual

0

4.1

1.

202

0

Only use parts in perfect working order

•

Never use damaged load-bearing equipment/lifting tackle. Damaged load-
bearing equipment/lifting tackle must be replaced and marked as not fit for use.

If you are concerned about safe use, contact 

Manitowoc Crane Care

.

Modification

Under no circumstances may changes or repairs, e.g. by welding, be carried out 
on load-bearing equipment/lifting tackle. The use of repaired or modified load-
bearing equipment/lifting tackle is not permitted. 

 4.3.2         

Information on slinging

Determine the weight and, if necessary, the centre of gravity of the load before 
slinging the load. Bear in mind that the weights of the hook blocks, ropes, chains, 
crossheads or other lifting tackle need to be added to the weight of the load. The 
lifting capacity of your truck crane must be sufficient to lift the total load. 

Make sure that the hook block is equipped with a 
fail-safe device in perfect working order. Only use 
suitable, sufficiently load-bearing and undam-
aged lifting tackle to sling the load.

Never use the hoist rope to fasten the load.

Align the main boom so that the hoist rope is 
always suspended vertically over the load.

Summary of Contents for GROVE GMK

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands