Makita HB350, Original Instructions Manual

Page: 4 / 155

O onal Accessories
For details of op
ti
ons, either refer to the catalog or inquire at the store of
purchase or a Makita sales o ce.
If you need any assistance for more details regarding these accessories, ask your local Makita
Service Center.
• HSS Cu
tt
er
• TCT Cu
tt
er
• Drill chuck
INTENDED USE
The intended use of this magne
ti
c drill is to drill holes in ferrous metals. The magnet is used to hold
the drill in place whilst the drill is func
ti
oning. It is designed for use in fabrica
ti
on, construc
ti
on,
railways, petrochemical, and any other applica
ti
ons when drilling ferrous metal.
Any devia
ti
on from its intended use will not be covered by warranty.
GENRAL POWER TOOL SAFETY INSTRUCTIONS
General power tool safety warnings
WARNING Read all safety warnings, instructions, illustrations, and speci cations provided with this
power tool. Failure to follow all instruc
ti
ons listed below may result in electric shock, re and/or serious
injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit . Clu
tt
ered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distrac
ti
ons can cause you to lose
control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodi ed plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi
ti
ons. Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase.
CAUTION: These accessories or as achments are recommended for use with
your Makita tool speci ed in this manual. The use of any other accessories or
a
tt
achments might present a risk of injury to persons. Only use accessory or
a
tt
achment for its stated purpose.