Makita HB350, Original Instructions Manual

Page: 3 / 155

CU
TT
IN
G
TI
ME
CU
TT
IN
G
TI
ME
HB350 SPECIFIFCATION
Cutter capacity - 35mm
Chuck Capacity - 13mm
No load speed - 850 rpm
Power consumption - 1050w
Clamping force - 8000N (815kg)
L x H x W (mm
) - 225 x 490 x 195
Weight - 11.
Voltage - 110/230v
Sound pressure level - 89.13 dB(A)
Sound Power level - 100.12 dB(A)
I
NCLUDES
: Integral c o o la nt system,
Warra nty, Carrying case, Allen keys, Safety
strap & Guard
•
Due to our continuing programme of research and
development, these specifications are subject to change
without notice.
THE BROACH CUTTING CONCEPT
If you are unfamiliar with the use of annular
(or broaching) cutters, take a few minutes to
read this guide - you will benefit from the better
performance and longer life of the tool if you
understand the concept.
Annular c utters only c ut m arterial a t the
periphery of the hole, rather than converting
the entire hole to shavings. As a result, the time
and energy required to make the hole is lower
than for a traditional twist drill.
The b r o achhing c a p a c ity o f a machine is
therefore, greater than the twist drill capacity.
The slug ejected after the cut also has a higher
scrap value than shavings.