8
8. Required accessories
• NiMH battery; 5 cells, min. 3700 mAh (e.g., Conrad item no. 1784857)
• Charger (e.g., Conrad item no. 1413029 or 1413030)
• Adapter cable XT30 (e.g., Conrad item no. 1785258)
• Batteries (2x AAA/Micro) (e.g., Conrad item no. 658010)
• Screw locking (e.g., Conrad item no. 826389)
• Mini-USB cable (e.g., Conrad item no. 1365369)
Optional:
• Servo for Pan unit * (e.g., Conrad item no. 1762878)
• Servo for tilt unit * (e.g., Conrad item no. 1762877)
• Arduino UNO (e.g., Conrad item no. 191789)
• Screw locking (e.g., Conrad item no. 1613301)
* The Pan & Tilt unit is the head mechanism (see Figure 1) and can optionally be printed on a 3D printer.
Required tools and material:
• Small side cutter (electronic side cutter)
• Scissors
• Open-end wrench SW 5.5 mm
• Open-end wrench SW 4 mm
• Phillips screwdriver PH1
• Phillips screwdriver PH2
• Hexagon socket 6 mm
• Hexagon wrench 1.5 mm
• Hexagon wrench 2.5 mm
• Screw locking (medium strength) e.g., LOCTITE
®
243 (Conrad item no. 1370555)
• 90° Stop angle or straight edge
• Work paper
Summary of Contents for MF-4992453
