22
c) Mounting the servo disks
Mount the servo disks as described in the following illustrations. Use two M2 nut for each servo disk. The other holes remain free!
These screws (all M2) are now already provided with a screw lock.
Required tool:
PH1 Phillips screwdriver
Small flat nose pliers or wrench for M2 nut (SW4)
Screw locking (medium strength)
Mounting the servo discs on the upper plate:
Figure 29 shows the top plate from above!
Figure 29
Figure 30 shows the top plate from below!
Figure 30
Summary of Contents for MF-4992453
