19
The Coxa servo and femur servo holder must be mounted 6 times (3 left and 3 right).
First insert a servo into the holder and screw it on. Only then is the second servo plugged in and screwed in.
The servo cable of the Coxa servo is inserted through the round opening at the top and the servo cable for the femur servo is inserted through the large oval
opening as with the U-angle mounting.
Screw the servos together with four plastic screws.
When screwing the servos together, align them so that they are centred in the plastic holder and are not tensed. If necessary, loosen the screws a little to
release the mechanical tension and then carefully tighten the screws crosswise.
Figure 22
Figure 23
Summary of Contents for MF-4992453
