DIAGNOSTIC MANUAL
MAN-00152
EMS
OCT 2011/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution
© 2011 Mahindra & Mahindra Ltd.
297
P068A - Main relay early opening error
P068B - Main relay struck error
COMPONENT LOCATION
NORMAL
OPERATION
EMS ECU checks the main relay actuation time during initialization and is within
the range
ECU checks the main relay during operation and no sticky operation noticed
DTC DETECTING
CONDITION
The main relay is not operating in the set time
PROBABLE
CAUSES
Open /short wiring harness
Loosen wiring harness connectors
Sticky relay
Faulty BEC
LAMP STATUS
No lamp indication
DTC REACTION
Engine will not start
No communication from EMS
HEALING
CONDITION
Ignition OFF/ON
Note-
This DTC's will be viewed in the diagnostic tool in healed condition only