DIAGNOSTIC MANUAL
MAN-00152
EMS
OCT 2011/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution
© 2011 Mahindra & Mahindra Ltd.
282
P0651 - Sensor supply voltage 2 monitoring error
SENSOR SUPPLY VOLTAGE MONITORING
EMS ECU monitors the reference voltage of the critical sensors and registers a DTC if the voltage is not
within the range
NORMAL
OPERATION
EMS ECU monitors the reference supply voltage to APP2 and are within the
range
DTC DETECTING
CONDITION
The sensor supply voltage to the APP2 is out of the range
PROBABLE
CAUSES
Short in sensor supply wire
Faulty APP2 sensor
LAMP STATUS
System check lamp ON
DTC REACTION
Torque limitation
HEALING
CONDITION
Ignition OFF/ON
CIRCUIT SCHEMATIC