Maguire Products Weigh Scale Blender WSB, Operation & Maintenance Manual

Page: 22 / 99

M A G U I R E P R O D U C T S , I N C .
Edition: August 6, 2014
22
W E I G H S C A L E B L E N D E R
®
Turn power on. From the NORMAL mode:
Model Setup Keypad Sequence:
Press
OPTIONS
Display will say:
ENTER PASSWORD
Press
then, press
Enter
Display will say:
MODEL SELECTION
Current Model: WSB 24R
Or whatever model it is currently set for.
Press
The
“Select Model”
Dropdown Menu
Scroll through all model sizes.
When the model you want is displayed, then:
Press Your Model, then press the
“
Select
” button.
Controller will reset and restart as the system you have selected.
When switching models, all parameter table information is lost and the new "default" information
for this model is loaded from ROM. If you should be in any doubt as to which is the correct model
you should refer to the Blender Identification Plate located on the frame of the Blender.
Retrofit Controllers Only
Select Correct Load Cell Configuration:
Select the correct load cell configuration using
the embedded toggle switch located on the left
side of the controller.
Slide the toggle to WSB-MB / 100 for Weigh
Scale blender models Micro Blender (WMB,
MB1, MB2) or WSB 100 Series (140 14R). Slide
the toggle to WSB OTHER for all other models.
Micro Blender or WSB 100 Series All other models