215028
18
Revision A
1028813
A
B
E
C
E
E
D
Figure 3.18: Deflector and Rear Baffle
4.
Turn over deflector (A) and place on rear baffle (B) and
between fixed deflector plate (C) and outer plate (D).
5.
Loosely secure deflector (A) in place with retained
hardware (E) in three locations. Do
NOT
tighten hardware.
Repeat on the opposite side of the header.
6.
Adjust the placement of deflector (A) as far inboard as
possible so that it contacts fixed deflector plate (C) welded
in place on the header. Tighten hardware (E) once deflector
is properly placed. Repeat on the opposite side of the
header.
7.
Check that the baffle is adjustable across all working
positions without binding.
NOTE:
Some contact is acceptable.