215028
21
Revision A
1030500
A
B
C
D
Figure 4.4: Right Deflector Hinge Rod
8.
Remove right deflector (B) and left deflector (C) from
shipping position. Retain for installation later.
9.
Remove right hinge pin (A).
10. Remove right bracket (D).
1030501
A
D
B
E
C
B
F
B
C
Figure 4.5: Right Side Bracket
11. Remove the two outer existing bolts (B). Retain the bolts
and discard the nuts.
12. Install right side bracket (A) on the underside of the
forming shield cover.
13. Install three 25 mm-long short neck M10 bolts (B) and
three Nyloc nuts (C).
14. Install support plate (D) on the top of the cover.
15. Install two 35 mm-long short neck M10 bolts (E) and two
nuts (F).
1030527
A
A
B
B
C
D
C
D
Figure 4.6: Plate and Forming Shield Angle
16. Install one 25 mm-long short neck M10 bolt (A) and nut (B)
through plate (C) and forming shield angle (D). Repeat this
step on the left side of the forming shield.
17. Repeat Step
to Step
on the opposite
side of the forming shield.
18. Place the forming shield in position under the windrower.
