215028
67
Revision A
1014940
A
B
C
D
E
Figure 8.4: Console and HPT Run Screen
7.
Turn IGNITION switch (A) to the ON position; the Harvest
Performance Tracker (HPT) display (B) will illuminate. If the
HPT is still booting up, wait for WAIT TO START (WTS)
symbol (C) to disappear before trying to start engine.
8.
Check that red PARK symbol light (D) is ON and that there
are no error messages on screen.
9.
Press HORN button (E) three times prior to starting the
engine.
1023033
A
B
Figure 8.5: HPT Header Disengaged Screen
10. Turn the IGNITION switch to crank (A).
NOTE:
When the engine starts and the header is not engaged, the
HPT will display the header disengaged page (B).
IMPORTANT:
•
Do
NOT
operate the starter for longer than 15 seconds
at a time.
•
If the engine does not start, wait at least 2 minutes
before trying again.
•
If you crank the engine for more than 30 seconds within
a 2-minute period, the engine will lock the starter circuit
to prevent overheating, and a flashing WTS symbol will
appear on the display. Wait for the WTS symbol to stop
flashing before attempting to crank engine again.
•
If the engine still does not start, refer to the operator
’
s
manual.
