215627
90
Revision A
$
Figure 5.41: Safety Prop Lever
20. Disengage the safety props on both lift cylinders as follows:
a.
Turn lever (A) away from the header to raise the safety
prop until the lever locks into the vertical position.
b.
Repeat the previous step for the opposite cylinder.
NOTE:
If the safety prop will
NOT
disengage, raise the header to
release the prop.
$
Figure 5.42: GSL
DANGER
Check to be sure all bystanders have cleared the area.
21. Start the engine and press HEADER DOWN switch (A) on
the GSL to fully lower the header.
$
%
Figure 5.43: HPT Display
22. Press rotary scroll knob (A) on the HPT to highlight the
QuickMenu options.
23. Rotate scroll knob (A) to highlight HEADER FLOAT
symbol (B), and press the scroll knob to select it.
