215627
30
Revision A
3.8
Installing Slow Moving Vehicle Signs
Slow moving vehicle (SMV) signs let other drivers know that the windrower is not capable of moving at a high speed.
1.
Retrieve the SMV signs from inside the cab and the installation hardware from the toolbox.
NOTE:
Use the ignition key to unlock the cab door and the toolbox compartment.
$
%
&
Figure 3.37: SMV Sign Installed on Mirror/Light
Support
–
Right Cab-Forward Side
2.
Position sign (A) on existing bracket (B) as shown on the
right cab-forward side mirror/light support, and secure it
with two M6 x 20 hex head bolts and M6 lock nuts (C).
IMPORTANT:
Ensure that the SMV sign does
NOT
cover the brake light.
$
%
&
Figure 3.38: SMV Sign Installed
–
Left Cab-
Forward Side
3.
Locate support (A) on the left cab-forward side of the
walking beam.
4.
Position sign (B) on support (A) as shown, and secure it
with two M6 x 20 hex head bolts and M6 lock nuts (C).
