215627
22
Revision A
$
%
Figure 3.17: Slide Hammer
6.
Adjust the lifting device
’
s lift height until pin (A) is loose.
Extract the pin from the front of the frame using slide
hammer (B) (MD #209816).
NOTE:
Use of a slide hammer is required due to the limited
amount of space in front of the fuel tank. Instructions are
included with the tool.
NOTE:
Removing the pins will be difficult if the right leg is bearing
any of the wheel
’
s weight.
7.
Remove the second pin.
$
Figure 3.18: Right Leg Ready to Move
8.
Move the leg outward to expose hole (A) in the frame.
$
%
Figure 3.19: Leg Pin
9.
Align the holes at the pin locations and use slide
hammer (B) to reinstall pins (A). If necessary, adjust the jack
to prevent damage to the outer edges of the pins.
