214323
19
Revision B
1000925
Figure 1.36: MD #194521
MD #194521
Auger entanglement hazard
DANGER
To prevent injury from entanglement with rotating auger:
•
Stand clear of header while machine is running.
•
Do
NOT
operate without shields in place.
•
Stop engine and remove key before opening shield.
General hazard pertaining to machine operation and servicing.
DANGER
To prevent injury or death from improper or unsafe machine
operation:
•
Read the operator
’
s manual and follow safety instructions. If
you do not have a manual, obtain one from your Dealer.
•
Do
NOT
allow untrained persons to operate the machine.
•
Review safety instructions with all Operators every year.
•
Ensure that all safety signs are installed and legible.
•
Make certain everyone is clear of machine before starting
engine and during operation.
•
Keep riders off the machine.
•
Keep all shields in place and stay clear of moving parts.
•
Disengage header drive, put transmission in Neutral, and
wait for all movement to stop before leaving operator
’
s
position.
•
Stop the engine and remove the key from the ignition
before servicing, adjusting, lubricating, cleaning, or
unplugging machine.
•
Use slow moving vehicle emblem and flashing warning lights
when operating on roadways unless prohibited by law.
1003333
Figure 1.37: MD #220797
MD #220797
Header tipping hazard
–
transport mode
DANGER
To prevent serious injury or death from the header tipping over
while in transport mode:
•
Read the operator
’
s manual for more information on
potential tipping or rollover hazards that the header may be
subject to while it is transport mode.
Summary of Contents for FD75
